|
|
|
Mingch Electric Co.,Ltd
|
|
|
| |
|
|
|
|

|

|
Click to enlarge image
|
Model Number |
AU9 |
| This developed by ANDELI Application |
| Surge Protector device,surge arrester developed this series (referred as SP) provides protection against surge current resulted from direct or indirect lightning strike or other instantaneous overvoltage. |
|
|
Technical data |
| Index |
Type |
| ADL1-D |
ADL 1-C |
ADL1-B |
|
Rated VoltageUn (V~) |
220 |
220 |
380 |
|
Max. Continuous Operating VoltageUc (V~) |
320 |
320 |
420 |
|
Protected Surge Current Up(kV)(8 /20μs) |
1 |
1.5 |
2.5 |
|
Normal Discharge Current Ism(kA)(8 / 20μs 5times) |
10 |
20 |
30 |
|
Max Discharge Current Imax(kA) (8 / 20μs 1time) |
20 |
40 |
60 |
|
Response Time t (nS) |
<25 |
|
Power withstanding (J) (2mS) |
640 |
640 |
1500 |
|
Ambient Temperature |
-40 ~+80 °C |
|
Colour of Function Unit |
yellow |
white |
red | |
|
one pole: provide protection against surge current of circuit single phase 220V. Two pole: provide protection against surge current of L and N phase to earth of circuit single phase 220V resulted from lightning. Three pole: provide protection against surge current of S phase of TT, TN-S system 380V, and also protect S to earth of IT TN-C system of 380V Four pole: provide protection against surge current against S, N to earth of TT TN-S system of 380V. |
| |
| Operating Condition |
The device shall be mounted indoor with less exposure onto Din rail 35mm The device shall be installed prior to the circuit breaker and shall be reliably connected to earth with resistance not exceeding 4Ω and cross section of conductor not less 6mm2 The device is equipped with warning display. Green colour from the indicating window is for normal operation, and red colour is for function failure. The function unit shall be checked regularly and the unit shall be replaced upon any failure being detected. |
|
|
|
|
| |
|
|
|